View larger
UV'Glass - UV-LED Lamp 24W
LCC30-LAMP
3134725015241
New product
The UV'Glass lamp allows you to cure all your UV'Glass resin creations quickly.
Very easy to use, connect it with the USB cable then:
- Click 1 time for 1 to 3 mm resin thickness (60s).
- Click for a long time for the last layer, in order to obtain a better finish (120s).
- Wait 1 to 2 minutes between each use so that your creations do not heat up too much.
The result is very dry and shiny.
Its legs fold up, allowing you to easily carry it with you.
If you use a mould (Résin'Mould LCC19-M1, M2, M4 or M5), make sure that it allows light to pass through.
Characteristics:
- 24W
- 8 LEDs
- Touch button 60/120 sec
- Dimensions: 16(w) x 6.8(h) x 8.5(d) cm
- The lamp must be powered only at low voltage (connected via the supplied USB cable, to a computer for example), corresponding to the marking of the device.
Content:
- 1 x Lamp
- 1 x USB
- 1 x Leaflet
